Product Download
If you want to download this product information Please click here
The tester is suitable for the steam test of food packaging and other correlative films .It is also the optimal
equipment for axenic packaging test.
Working principle:
Adopt the electricity heating method, heat directly after in pouring the water , produce the high pressure
steam needed to steam the specimen, to compress the air from the outside after steaming, the temperature
of the specimen will decline to 30～40℃, after quick-deep freezing hydraulic pressure for 3 minutes.
Character：
it can do operations: poach and quick-deep freezing anti-pressure steam；set up over loading protection of
the heater and warning buzzer when the test finished；set up two safety valves，when steam pressure is
over 0.25MPa, it release itself；when the inner temperature is up to 140℃，the power cuts off
automatically.
Main fixtures：
mainframe、shelf、sampling clamp、plastic drainpipe wire、plastic pipe and etc.
Technical parameters
Hydraulic pressure: 0.15MPa-0.25MPa (must)
Air pressure: 0.25MPa constant (must)
Effective cubage: 50L (300mm×750mm)
Dimension of clapboard: 275mm×190mm×20mm (2pics)
Temperature of steaming: 101℃～135℃
Temperature of water: ≤100℃
Time: 0～999minutes
Relative humidity: ≤80﹪
Power: AC220V±22V, 50Hz±1Hz (ground power pre-requisite)
Dimension: 450mm×570mm×1100mm
