Product Download
If you want to download this product information Please click here
Used for testing the performance of discoloring, fading, aging, transmissibility, peeling, hardening,
softening, of the products and materials in the industries of rubber, plastic, paint, petrochemicals, auto,
fabric, for solar radiation simulation test( illumination, raining, temperature, humidity, )
Relevant Standards
ISO4892, ISO03917, ISO11341, ISO105, AATCC M16, AATCC169, ASTM G26, ASEJ1885KJ,
ASEJ1960KJ, GJB 150.7.
Instrument features:
1. an advanced computer controller and multi-channel temperature and humidity control system.
2. easily create complex test procedures to facilitate the choice and control light, temperature, humidity
and spray conditions.
3. menu-driven display guides the user through the button to select the test parameters.
4. button to select the database standard or user-defined test procedures.
5. using a short arc, high light intensity, water-cooled xenon arc lamp and professional double-filter system
simulate the real source of sunshine.
6. European imports of fixed-band spectrum traceable calibration systems, digital set light intensity,
real-time monitoring, automatically adjusted to meet different standards for light stability testing requirement.
7. superconducting fiber imported, exported by the whole band monitoring light source, light detector at
warehouse outside monitoring, no drift, no decay, high precision, life permanently.
8. hybrid water cooling system, greatly reducing water consumption and power consumption.
9. large experimental warehouse design, to maximize the exposure area.
10. the board thermometer (BPT), the standard blackboard Thermometer (BST) and sample the same
station (isometric) testing, a true reflection of the sample under test conditions, the measured CPU
processing digital data, charts, graphs, etc. displayed on the color screen, do not stop observing.
11. ultrasonic atomizer and PTC double humidification mode, professional dehumidification system to
ensure accurate and stable humidity test.
12. equipped with self-circulation system and air filtration system, significantly reducing the environmental
requirements.
13. 10.4-inch touch screen display control, monitoring a variety of test modes (animation, digital,
graphics), easy manipulation, clear and intuitive.
14. sample holder to achieve all the time, respectively, can be machine experiments with different samples,
to facilitate monitoring of the test.
15. front and back of the spray model.
16. the instrument is equipped with parallel communication interface, can provide Chinese A4 printing
(optional).
17. a test run of 1000 hours of continuous quality assurance.
1. an advanced computer controller and multi-channel temperature and humidity control system.
2. easily create complex test procedures to facilitate the choice and control light, temperature, humidity
and spray conditions.
3. menu-driven display guides the user through the button to select the test parameters.
4. button to select the database standard or user-defined test procedures.
5. using a short arc, high light intensity, water-cooled xenon arc lamp and professional double-filter system
simulate the real source of sunshine.
6. European imports of fixed-band spectrum traceable calibration systems, digital set light intensity,
real-time monitoring, automatically adjusted to meet different standards for light stability testing requirement.
7. superconducting fiber imported, exported by the whole band monitoring light source, light detector at
warehouse outside monitoring, no drift, no decay, high precision, life permanently.
8. hybrid water cooling system, greatly reducing water consumption and power consumption.
9. large experimental warehouse design, to maximize the exposure area.
10. the board thermometer (BPT), the standard blackboard Thermometer (BST) and sample the same
station (isometric) testing, a true reflection of the sample under test conditions, the measured CPU
processing digital data, charts, graphs, etc. displayed on the color screen, do not stop observing.
11. ultrasonic atomizer and PTC double humidification mode, professional dehumidification system to
ensure accurate and stable humidity test.
12. equipped with self-circulation system and air filtration system, significantly reducing the environmental
requirements.
13. 10.4-inch touch screen display control, monitoring a variety of test modes (animation, digital,
graphics), easy manipulation, clear and intuitive.
14. sample holder to achieve all the time, respectively, can be machine experiments with different samples,
to facilitate monitoring of the test.
15. front and back of the spray model.
16. the instrument is equipped with parallel communication interface, can provide Chinese A4 printing
(optional).
17. a test run of 1000 hours of continuous quality assurance.
Technical parameters
<table “style=”height: 727px;” border=”1″ width=”671″ cellspacing=”0″ cellpadding=”0>
Model
SKZ161D
Test compartment temperature control
30～70℃, Resolution: 0.1 ℃
Storage humidity control test
Ming period :10-75% RH, humidity fluctuations ± 3% RH; dark cycle :10-95% RH, humidity fluctuate ± 5% RH;
Time control experiments
0min~999:59h, Accuracy ± 1min
Irradiance control
1.00-1.30W/m2/420nm Accuracy: ± 0.02 W/m2/420nm;digital set,
automatic compensation.
automatic compensation.
Control and monitoring wavelength
Optional 340nm, 420nm ,300-400nm ,300-800nm
Xenon arc lamp rated power
4.5KW
Sample holder rotation speed
1rpm can be set
Diameter distribution of sample clip
φ500mm
Maximum exposure area
3500cm2
Sample holder can be mounted with the
number of dimensions
number of dimensions
145 × 75mm model 25; 145 × 45mm model 35
Timing of each sample holder, respective
≤10000h
Photoperiod
≤10000h
Spray cycle
≤10000h
Blackboard temperature range
（BPT） 30-90℃±2℃;（BST） 35-95℃±2℃
Display control
10.4-inch touch screen
Data Output
Digital color display (A4 print in English optional)
Sample holder type
Single
External circulating water requirements
Water pressure :140-1345kPa Flow: 1.0L/min
Requirements within the recycled water
High water flow: 0.5L/min
Power supply
AC380V±5% 50Hz 10KW
Dimensions
1250×830×1800mm
Weight
350kg
Technical parameters
|
Model
|
SKZ161E
|
|
Test chamber temperature control
|
30～70℃, Distinguishability:0.1℃
|
|
Test chamber humidity control
|
light cycle : 10-75%RH, humidity fluctuation ±3%RH;
shade cycle ：10-95%RH, humidity fluctuation ±5%RH;
|
|
Testing time control
|
0min~999:59h, Accuracy:±1min
|
|
Irradiance
|
0.8～2.5W/m2/420nm Accuracy:±0.03W/m2/420nm, Digital setting
automatic compensation |
|
Control and monitoring wavelength
|
Optional 340nm, 420nm, 300-400nm, 300-800nm wave band
|
|
Rated power of xenon lamp
|
4.5KW
|
|
Slewing speed of sample frame
|
1-10rpm settable
|
|
Distribution diameter of sample clamp
|
φ550mm
|
|
Maximum exposure area
|
3500cm2
|
|
size and number of sample clamps
|
145×75mm template 35 block;145×45mm template 48 pieces
|
|
Each sample folder times respectively
|
≤10000h
|
|
Illumination cycle
|
≤10000h
|
|
Spraying cycle
|
≤10000h
|
|
Blackboard temperature range
|
（BPT） 30-90℃±2℃;（BST） 35-95℃±2℃
|
|
manipulation showing
|
10.4 inch touch screen
|
|
Data output
|
Digital color display (A4 print in English optional)
|
|
Sample holder type
|
Double
|
|
External circulating water requirements
|
Water pressure :140-1345kPa Flow: 1.3L/min
|
|
Requirements within the recycled water
|
High water flow: 0.6L/min
|
|
power source
|
AC380V±5% 50Hz 10kW
|
|
external dimensions
|
1250×1000×1800mm
|
|
Weight
|
400kg
|
Technical parameters
<table “style=”height: 727px;” border=”1″ width=”100%” cellspacing=”0″ cellpadding=”0>
Model
SKZ161F
Test compartment temperature control
20～93℃, Resolution: 0.1 ℃
Storage humidity control test
Light cycle:10-75% RH, humidity fluctuations ± 3% RH;
dark cycle :10-95% RH, humidity fluctuate ± 5% RH;
Time control experiments
0min~999:59h, Accuracy ± 1min
Irradiance control
0.8 ~ 2.5W/m2/420nm Accuracy: ± 0.03W/m2/420nm;digital set,
automatic compensation
automatic compensation
Control and monitoring wavelength
Optional 340nm, 420nm ,300-400nm ,300-800nm
Xenon arc lamp rated power
6.5KW
Sample holder rotation speed
1-10rpm can be set
Diameter distribution of sample clip
φ650mm
Maximum exposure area
6900cm2
Sample holder can be mounted with the
number of dimensions
number of dimensions
145 × 75mm model 68; 145 × 45mm model 90
Timing of each sample holder, respective
≤10000h
Photoperiod
≤10000h
Spray cycle
≤10000h
Blackboard temperature range
（BPT） 30-100℃±2℃;（BST） 35-105℃±2℃
Display control
10.4-inch touch screen
Data Output
Digital color display (A4 print in English optional)
Sample holder type
Three
External circulating water requirements
Water pressure :140-1345kPa Flow: 1.5L/min
Requirements within the recycled water
High water flow: 0.8L/min
Power supply
AC380V±5% 50Hz 12kW
Dimensions
1350×1050×1900mm
Weight
460kg
Email:info@skzindustrial.com