Determination pressure for a variety of fabrics, including knits, woven fabric, non-woven fabric, laminated
fabric and other craft-made variety of fabrics, in standard conditions or under wet bursting strength and
bursting dilation.
bursting dilation.
Standards
ISO13938-2, ASTM D3786, IWS Tm29
ISO13938-2, ASTM D3786, IWS Tm29
Test principle:
Through the circular clamping the sample holder can be extended in the diaphragm, the gas pressure
applied below the diaphragm, the diaphragm and the sample expansion. Rate of increase has been
constant pressure until the sample burst, measured burst strength and burst dilation.
Instrument features:
1.Computer control, automatic burst test, automatic calibration, automatic data processing, experimental
form of a report output.
2.Air power, high cleanliness.
3.Color touch screen interface, the English menu operation, support online communication
4.Bursting pressure of up to 1500KPa (15Bar or 200psi)
5.Burst dilation can reach 70mm
6.Test surface enhanced lighting system
7.The main specimen clamping system of aerodynamic power
8.A variety of optional test area, and easy switching
Technical parameters:
applied below the diaphragm, the diaphragm and the sample expansion. Rate of increase has been
constant pressure until the sample burst, measured burst strength and burst dilation.
Instrument features:
1.Computer control, automatic burst test, automatic calibration, automatic data processing, experimental
form of a report output.
2.Air power, high cleanliness.
3.Color touch screen interface, the English menu operation, support online communication
4.Bursting pressure of up to 1500KPa (15Bar or 200psi)
5.Burst dilation can reach 70mm
6.Test surface enhanced lighting system
7.The main specimen clamping system of aerodynamic power
8.A variety of optional test area, and easy switching
Technical parameters:
1.Test range:0-1 .5 Mpa
2.Minimum scale value: 0.002 Mpa
3.Pressure mode: direct pressure two kinds of time pressure
4.Test Accuracy: ≤ ± 0.2% F · S
5.Flexible diaphragm thickness: ≤ 2mm
6.Test area: 50cm2 (φ79.8mm)
7.Pressure rate: nonlinear sub-pressure 0.1-0.5L/min
8.Safety cover: high transparent plexiglass
9.Power: AC220V/50Hz 800W
10.Dimensions: 560 × 450 × 580mm (host L × W × H)
11.Weight: 60kg
Optional test area:
2.Minimum scale value: 0.002 Mpa
3.Pressure mode: direct pressure two kinds of time pressure
4.Test Accuracy: ≤ ± 0.2% F · S
5.Flexible diaphragm thickness: ≤ 2mm
6.Test area: 50cm2 (φ79.8mm)
7.Pressure rate: nonlinear sub-pressure 0.1-0.5L/min
8.Safety cover: high transparent plexiglass
9.Power: AC220V/50Hz 800W
10.Dimensions: 560 × 450 × 580mm (host L × W × H)
11.Weight: 60kg
Optional test area:
Area(cm2)
|
100
|
50
|
10
|
7.3
|
Diameter(mm)
|
112.8
|
79.8
|
35.7
|
30.5
|
Email:info@skzindustrial.com